Transition Networks 100BASE-TX to 100BASE-FX Media Converter
Description:
www.transition.com Transition Networks' 100BASE-TX to 100BASE-FX Media Converter makes cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks easier than ever before.
Operates under heavy traffic loads without excess heat so there is no need for a failure-prone internal fan.
Round trip delay of only 40 bit times - far below the Class II rating of 92 bit times.
Automatically detects and reports loss of link on a connection using Link Pass Through. This feature allows the equipment at the remote end of a link failure to "see" this failure and respond with corrective actions, such as Spanning Tree fail-over links, proprietary trunking links, or failure reports through SNMP or RMON procedures built into the switch, router or hub.
Automatically detects faults in a link using Far End Fault. This feature of the Fast Ethernet Fiber standard allows you to troubleshoot a fault, even if it is only in one direction; alerting the device on the same side as the failure.
The converters will also automatically re-establish link when connected to two 10/100 auto-negotiating switches if link is lost. With other manufacturers' converters the user must intervene to re-establish link.
Pause is a component of Auto-negotiation and because Auto-negotiation is not supported over a fiber link, switches cannot utilize this flow control feature without our converters. Enabling the Pause feature on the converters betwen two switches allows users to take advantage of this flow control feature on their equipment.
Auto-Cross:
AutoCross technology eliminates an entire category of network troubleshooting by automatically matching crossed and uncrossed cables to the appropriate connection. The twisted pair port is instantaneously configured to the correct MDI or MDI-X configuration.
N-Way Auto-Negotiation:
Only Transition Networks guarantees compatibility with any 10/100 compliant port. This feature allows you to force the proper port configuration through an external switch on the converter, unlike competitive products that ship in Auto-Negotiation mode and may require both hardware and software configuration.
Fiber Optic Connector:
Min TX PWR: -19.0 dBm
Max TX PWR: -14.0 dBm
RX Sensitivity: -30.0 dBm
Max In PWR: -14.0 dBm
Link Budget: 11.0 dB
Switches:
SW1: Auto-Negotiation On/Off
SW2: Pause TX On/Off
SW3: LPT On/Off
SW4: FEF On/Of
Jumpers:
Jumper Block 1: Auto Cross enable
UL Listed
FCC Class A
EN55024
EN55022 Class A
EN61000
CE Mark
IEEE 802.3 100BASE-FX, 100BASE-TX
Effective for Products Shipped May 1, 1999 and After. Every Transition Networks' labeled product purchased after May 1, 1999 will be free from defects in material and workmanship for its lifetime. This warranty covers the original user only and is not transferable.
This warranty does not cover damage from accident, acts of God, neglect, contamination, misuse or abnormal conditions of operation or handling, including over-voltage failures caused by use outside of the product's specified rating, or normal wear and tear of mechanical components. If the user is unsure about the proper means of installing or using the equipment, contact Transition Networks' free technical support services. Unit LED:
Media Converter E-100BTX-FX-05(MT) Lifetime 3" Height x 9.5" Width x 12" Depth 0 ft to 10000 ft Operating Black STP/UTP Fiber 100Base-TX Category 5 STP/UTP 100Base-FX 1300 nm Multi-mode Fiber 9 V DC Transition Networks, Inc 100BASE-TX to 100BASE-FX Media Converter Fast Ethernet SNMP RMON 32 °F (0.0 °C) to 122 °F (50.0 °C) Operating -4 °F (-20.0 °C) to 185 °F (85.0 °C) Storage Transition Networks 1 x RJ-45 1 x MT-RJ 3" Height x 1" Width x 4.75" Depth 1.24Mile Lifetime Limited 2 100Base-TX 100Base-FX
As you enjoy the convenience and efficiency of computer, you may have bothered a lot of problems. Since disks are so important for computer, it is necessary to maintain the disk. I...Read More How to Protect Your Digital Camera
Electronic components are physical entities within the system. Their sole purpose is to affect the associated fields or the electronic via a desired reliable method with the inte...Read More
5 More Products You May Be Interested In ...
General-purpose duct tape, 9.0 mils thick, 48mm x 55m, orange ($7.99) Don't sell yourself short--use this duct tape with 33% more length. The versatile, water- and tear-resistant design is ideal for general repairs, sealing and binding. Features natural rubber adhesive that bonds to nearly any surface. Plus, you can use it indoors or outdoors. Tape Type: Duct; Adhesive Material: Natural Rubber; Tape Special Feature: N/A; Width: 48.00 mm.
Cables To Go SCSI Cable ($35.99) www.cablestogo.com VHDCI (Very High-Density Cable Interconnect)SCSI Cables from Cables To Go feature 28AWG double-shielded twisted-pair cabling and .8mm 68-pin molded connectors to reduce EMI/RFI interference. These cables are designed to meet or exceed SCSI specifications. This cable is primarily used to connect advanced SCSI multiport applications to RAID controllers. The small footprint allows up to four channels to be connected on a single card, and offers excellent shielding against data loss. By creating this improved physical interconnect, connectivity is both more versatile and manageable. VHDCI cables are also referred to as SCSI-V cables.
Twisted-pair conductors ensure that each data line is paired with a ground line to minimize interference
Braid and foil shielding reduces EMI/RFI interference ensuring error-free data transfer
Data Transfer Cable 6ft PVC 20710 1" Height x 4" Width x 5" Depth Black Cables To Go SCSI Cable Cables To Go Retail SCSI 1 x 68-pin VHDCI Male Device 1 x 68-pin MD-68 Male Device 0.71 lb Lifetime
Series Labeling Tape is designed for use with Duratype 240, 240SE and 244SE labeling systems. Labeling tape is well-suited for general office purposes.
Black on Clear
Fits all 240, 240SE, and 244SE labeling systems
Label Tape Cartridge 2227501 Kroy, LLC 1 x Tape 0.5" x 50' DuraType 240 Labeling Tape DuraType Kroy US No 0% 0% No Clear
Copier toner is designed to be used in Mita DC-1205, 1255, 1415, 1435 and 1455. Yields 2,000 pages.
1 x Cartridge
65 Gram cartridge
Mita copiers:
DC1205
DC1255
DC1415
DC1435
DC1455
Toner Cartridge 37041013 1.25" Height x 2.5" Width x 11.75" Depth 0.34 lb Kyocera Mita Black Toner Cartridge Black Kyocera Mita OEM China No 0% 0% 1 Laser 2000 Page
